Home » Shop » hot sale » Battle Born 100Ah 12V Deep Cycle Self-Heating Lithium Battery (BB10012H-1KIT)

Battle Born 100Ah 12V Deep Cycle Self-Heating Lithium Battery (BB10012H-1KIT)

Original price was: $599.40.Current price is: $461.19.

Sale!
SKU: BB10012H Category:

The Battle Born 100Ah 12V Deep Cycle Self-Heating Lithium Battery from Nomadic Supply Company® delivers superior and long-lasting performance! Equipped with a proprietary, low-draw internal heating technology, the Battle Born 100Ah 12V Deep Cycle Self-Heating Lithium Battery is ready to charge and provide superior power no matter the cold weather you may face.

Battle Born 100Ah 12V Deep Cycle Self-Heating Lithium Battery (BB10012H-1KIT) Features:

  • Drop-in replacement for Group 27 & 31 batteries
  • Designed for Versatility with the ability to be wired in series or parallel and mounted in any orientation
  • Safe & Reliable lithium iron phosphate (LiFePO4) chemistry
  • Rugged Battery Design built for RV, camper van, boat, trolling motor, industrial, off-grid, and residential backup applications
  • Lightweight at just 31 pounds for 100Ah of usable power power
  • Long-lasting with 3,000-5,000 deep discharge cycles providing up to 10-15 years of power
  • Internal BMS featuring low-temperature protection, high and low voltage, short circuits, and more

Internal Heat Technology:

  • Proprietary internal heating capabilities
  • Operating Temp Range:-4°F to 135°F
  • Heat activated when internal temperature reaches ~35°F (and heat function is enabled)

Accepted Voltages:

  • Charging voltage: 14.2 – 14.6 V
  • Float voltage: 13.4 – 13.8 V

Dimensions (L x W x H):

  • 12.76 x 6.86 x 8.95 in.

Ships With:

  • 18-8 stainless steel 5/16 – 18 1” and 1-1/4” bolts
  • Brass washers
  • 18-8 stainless steel nuts with nylon inserts

Items in Each Heated Battery Kit Include:

  • 1 -SPST Rocker Switch
  • 1 -25’ 18 AWG wire terminated with 0.187 QD and 8 ring lug
  • 1 -25’ 18 AWG wire terminated with 0.187 QD and 5/16 ring lug
  • 1 – Jumper wire (For use if you are installing more than one heat-enabled battery model):
    • 1 -14-inch 18 AWG wire terminated with two 8 ring lugs
    • 2 -M4 x 5mm long Philip head screws
    • 1 -8 ring lug
    • 1 -1-inch piece of shrink wrap

Please Note: A CSL is required for use with inverters 3500W or higher.