SprayMax Self Etch Primer Gray — 11.2, Light Gray

Built for the job.

Excellent corrosion protection Fast drying Welding certificate Can be over coated with all solvent-based and waterborne base coats and 2K top coat systems Can be used as a wash primer with good adhesion properties or as a filler primer with good filling volume depending on-the thickness of application. Ideal for…

SprayMax 1K Self Etch Primer in gray is a single‑component, low‑odor primer formulated for rapid adhesion on a wide range of body shop substrates. It is intended for use as a base coat before topcoats on aluminum, e‑coat, galvanized steel, plastic, polyester, existing primer, and plain steel surfaces.

The primer offers a flash time of 2‑3 minutes, allowing fast re‑coat cycles while maintaining good film build and corrosion resistance. Its zero VOC formulation meets strict environmental requirements without sacrificing performance, and the gray tint provides excellent coverage for uniform finish preparation.

Because the product is classified with a “Warning” signal word and includes acute toxicity, carcinogen, and flammable hazards, technicians must wear eye protection and a suitable respirator, and work in a well‑ventilated area. Follow the SDS for detailed first‑aid procedures.

Why Pros Choose SprayMax SPM

• Can be used as a wash primer with good adhesion properties or as a filler primer with good filling volume depending on-the thickness of application. Ideal for subsequent waterborne base-coats.

How to Use

For subsequent waterborne basecoats

1. Clean and degrease the substrate; ensure the surface is free of oil, wax, and loose material.
2. Apply a uniform coat of 1K Self Etch Primer Gray using a spray gun at the recommended pressure.
3. Allow the primer to flash for 2–3 minutes before handling or applying additional coats.
4. After flash, inspect for coverage; if a second coat is required, repeat steps 2‑3.

Compatibility

Compatible substrates: E-Coat.

Compatible paint systems: Waterborne, Solvent, 2K, 1K.

Specifications

Flash Time

2‑3 min

VOC

0 g/L

Substrates

Aluminum, e‑coat, galvanized, plastic, polyester, primer, steel

About SprayMax

SprayMax 2K aerosols deliver urethane clear, primer, and basecoat performance from a can — ideal for spot repairs and small panels.

Frequently Asked Questions

What substrates can I apply 1K Self Etch Primer Gray to?

The primer is compatible with aluminum, e‑coat, galvanized steel, plastic, polyester, existing primer, and steel surfaces.

How long is the flash time before I can handle the coated part?

Flash time is 2 – 3 minutes under typical shop conditions.

What personal protective equipment is required when spraying this product?

Use eye protection and a respirator approved for organic vapors and aerosols.

Is this primer low in volatile organic compounds?

Yes, it is listed as 0 VOC.

What are the main hazards associated with this primer?

The product carries a “Warning” signal word and is classified for acute toxicity, aspiration hazard, carcinogenicity, compressed gas, eye damage, flammability, oxidizer, reproductive toxicity, and skin corrosion.

Documents & Safety

• Safety Data Sheet (SDS)
• spraymax_3680001_catalog.pdf
• spraymax_3680003_specification_sheet.pdf
• SDSREZ931_3680003_20190731_EN.pdf

Warning: This 1K Self Etch Primer contains hazardous chemicals. Wear safety glasses or goggles and a suitable respirator at all times. The material is toxic if inhaled, may cause lung irritation and aspiration, is classified as a carcinogen, and can corrode skin and damage eyes. It is also flammable, acts as an oxidizer, and poses reproductive hazards. Always refer to the full SDS before use.

Why Buy from autofxmart

• Authorized distributor — authentic, factory-fresh stock.
• Fast US shipping — most orders ship within 1 business day.
• 30-day returns — buy with confidence.
• Pro-shop pricing — bulk discounts available on request.
• Expert support — questions? Email us at [email protected].