Built for the job.
Liquid additive that can be used in small quantities with 2K isocyanate hardeners to achieve rapid through-cure. Super accelerator for 2K paints, clear coats and primers.
U-POL® Rocket™ UP0735 Paint Accelerator (250 mL) is a high-performance additive designed for use with U-POL two-component isocyanate hardeners to accelerate cure of topcoats applied over primer. It is formulated to reduce flash time and improve overall build efficiency in professional body shop environments.
The accelerator works specifically with primed substrates, delivering faster cross-linking without compromising film integrity. Its low flash point of 25 °C enables rapid temperature rise during the curing cycle, helping achieve shorter recoat intervals while maintaining consistent coverage across complex panel geometries.
Due to its classification for acute toxicity, flammability, and respiratory hazards, handling requires eye protection, chemical-resistant gloves, protective clothing, and a respirator in well-ventilated areas. Follow all H-statements (H225, H226, H304, H312, H314, H315, H317, H318) and SDS guidelines for safe use.
Why Pros Choose U-POL UPO
- (1) 250 mL bottle of ROCKET™ will accelerate up to 63 sprayable quarts of primer or clear coat
- Speeds up demasking and overpainting when mixed with 2K hardeners
- Increases throughput, improving profits
- Can be used with all U-POL® coatings
- Reduces paint “skinning” in high humidity areas
Compatibility
Compatible paint systems: 2K.
Specifications
| Part No. | 0735 |
|---|---|
| Product Line | UPO |
| Standard/Approvals | California Pro65 Warning: Cancer |
| Manufacturer | U-POL |
| Trade Mark | ROCKET™ |
| UPC | 501079610183 |
| Brand | U-POL® |
| Rubberized | No |
| Color | Clear |
| Container Type | Bottle |
| Form | Liquid |
- Mix Ratio
- open a fresh can of 2k isocyanate hardene
- Compatible Substrates
- primer
About U-POL
U-POL delivers pro-grade refinish products including Raptor bed liner, Dolphin glazes, and Power Can aerosols used in shops worldwide.
Frequently Asked Questions
What substrates can I use U-POL® ROCKET™ UP0735 with?
The accelerator is formulated for use on primer surfaces applied with U-POL coatings.
What personal protective equipment (PPE) is required when handling this product?
Wear eye protection, chemical-resistant gloves, protective clothing, and a respirator as recommended in the safety data sheet.
Are there any specific safety hazards I should be aware of?
The product is classified with acute toxicity, aquatic toxicity, aspiration hazard, carcinogenicity, eye damage, flammability, organ toxicity, oxidizer, reproductive and respiratory effects. Follow all H-statements (H225, H226, H304, H312, H314, H315, H317, H318) and handle in a well-ventilated area.
Documents & Safety
- Safety Data Sheet (SDS)
- Technical Data Sheet (TDS)
- upol_up0735_specification_sheet.pdf
Signal Word: Danger.
Required PPE: safety goggles or face shield, chemical-resistant gloves, protective clothing (coveralls), and a suitable respirator for dust or mist exposure.
This accelerator is highly flammable with a flash point of 25 °C, can cause severe eye damage, skin burns, respiratory irritation, and is toxic if inhaled, swallowed, or absorbed through the skin. It also poses serious aquatic toxicity and long-term health risks such as organ damage and carcinogenic effects.
Always refer to the full SDS before use.
Why Buy from autofxmart
- Authorized distributor — authentic, factory-fresh stock.
- Fast US shipping — most orders ship within 1 business day.
- 30-day returns — buy with confidence.
- Pro-shop pricing — bulk discounts available on request.
- Expert support — questions? Email us at [email protected].
